REVELL - Plasto "Filler/Repair Putty" - 25gr

Revell Plasto — Filling and Repair Putty — 25 g tube

Correct minor assembly flaws in your models with Revell Plasto filler. Specially designed for model-making, this product fills gaps, cracks, indentations and irregularities that may remain visible after the various parts have been glued together.

Supplied in a 25 g tube, the filler is applied directly to the area requiring repair. It is particularly suitable for fuselage joints, bodywork seams, ship hulls, figurine parts and small gaps between two plastic components.

Once dry, the surface can be sanded to remove any excess product and achieve a smooth transition between the parts. The repaired area then provides a more uniform base for applying primer and paint.

Its fine consistency makes it easy to carry out minor corrections and finishing work. For deep recesses, it is best to apply several successive thin layers rather than a large amount in one go, allowing each application to dry before continuing.

Revell Plasto contains solvents and must be used in a well-ventilated area, away from flames and sources of heat. The tube must be carefully resealed after use to minimise the product drying out.

Technical specifications

• Manufacturer: Revell

• Range: Plasto

• Product type: Filling and repair putty for model kits

• Packaging: Tube

• Contents: 25 g

• Main use: Correcting assembly defects

• Applications: Joints, cracks, dents, scratches and gaps between parts

• Suitable surfaces: Mainly scale models and model-making parts

• Application: Apply directly to the area to be repaired

• Can besanded after drying: Yes

• Can be painted after preparation: Yes

• Finish achieved: Smooth surface after drying and sanding

• Drying time: Varies depending on the thickness applied and ambient conditions

• Recommended tools: Modelling spatula, fine-grit sandpaper and sanding block

• Cleaning: Before curing, using a product compatible with solvent-based fillers

• Recommended use: In a well-ventilated area

• Category: Model-making

• Sub-category: Fillers, adhesives and finishing products

• Manufacturer’s reference: 39607

Expected delivery date, subject to change by the distributor.